Lawnscaping Challenge #25: Birthday!

Now that I'm blogging again and the holiday rush is over, I've actually started (gasp!) reading blogs again. I know, it's craziness, but it had to happen eventually. I've followed Lawn Fawn's blog for over a year now but just recently discovered their Lawnscaping blog and challenges. Their current challenge is right up my alley so I decided to jump in and come up with a birthday card!

Here's their inspiration photo, in celebration of their birthday:

Now obviously they'd like it if I used Lawn Fawn stamps for the challenge, but it's actually not a prerequisite. Good thing, too, as it turns out all I have are Christmas stamps and Get Well stamps from Lawn Fawn! Eep! (Their new breakfast set is totally on my 'must have' list, though).

So, what did I make? Take a look:

And then on the inside:

Cute, right? Who doesn't love yummy cupcakes on their birthday, especially chocolate ones.

How I made it:

• ivory linen cardstock base (paperandmore.com), cut to a folded size of 4.25"x5.5"
• chocolate toile paper (Recollections, Michael's store brand) cut to 4"x5.25"
• chocolate cardstock (from my stash), cut to 3.5"x4.75"
• pink cardstock (from my stash), cut to fit the stamp...about 1"x2"
• white cardstock (seriously, you should see how much paper I own)
• birthday stamp set (from my stash)
• chocolate ribbon (stash again), about 4"
• StazOn Java Bean & True Black ink
• Versamark Plumeria chalk ink
• watercolor pencils
• glitter glue
• hole punch
• cutter
• scissors
• adhesive
• Zots 3D dots

I started by stamping the cupcakes onto the white cardstock using the True Black ink. Then I started 'decorating' my cupcakes with the colored pencils. You could probably use Copics as well, but I haven't been able to budget them into my 'habit' yet. Carefully cut them out leaving a little bit of a white edge and set aside.

Ink the edges of the chocolate toile paper with the Java Bean and attach to the ivory card base. Next comes the inked chocolate cardstock. Stamp the sentiment onto your pink cardstock, punch a hole for the ribbon, then ink the edges. (Don't do what I did and ink the edges before punching the hole...you wind up with Java Bean fingers!) Feed a bit of ribbon thru the hole and knot it, trimming the ends to make them uniform and cute. Attach to the bottom corner with the 3D Zots to pop it off the card. Now for the cupcakes - attach them with the 3D Zots as well, then add 'confetti' with the glitter glue. After the glitter is dry, stamp the inside of the card with your sentiment. All done! A pretty, handmade birthday card for friends and family. You can easily make several of these at a time and keep them on hand for, well, birthdays!

Let me know if you make one yourself - I'd love to see how it came out.

Happy Crafting!

Homemade Coasters

It was a very handmade Christmas at our house. Not only was it a financially-sound option, but it was really satisfying to see someone really excited about gifts we made them.

For my sister and her fiance we made two sets of handmade coasters. Each set had four coasters and were actually very simple to make. We did one set with a monogram (luckily, their last names start with the same letter! It's even funnier that the same thing was true with my husband & I...lol) and the second set was with kitties & a puppy. They have several cats and a dog so it was fitting to give a nod to their furbabies as well.

So, how did we make them?

Warning: the photos came out awful! I had no idea until after the holidays, of course...sigh...

•  4"x4" ceramic tiles that we found at Lowe's for $0.16/each
• Mod Podge, matte finish
• spray Mod Podge, matte finish
• 3/4" felt furniture circles, 4/tile
• foam brush
• 4"x4" design*

*for these personalized tiles I made up my artwork in Photoshop, but you could easily use scrapbooking paper as well

Trim up your paper to 4"x4" and set aside. Lay out your tiles on a covered surface and get your Mod Podge ready. Lightly coat your first tile with Mod Podge and carefully lay your paper over the top. Smooth it out to remove all the bubbles and set aside to let dry. Keep smoothing bubbles around the edges as needed while it dries and don't be afraid to go back in with your finger and more Mod Podge to tack it all down. Continue for all of your tiles and let them all sit & dry.

Once dry, give them a second coat of Mod Podge. Once that coat is dry, spray them all with the spray Mod Podge to give it a sealant against spilled liquids...coasters do seem to attract those. (ba-dum-bump) Once everything is dry (we let them sit for a day or so), apply the felt circles on the bottom to give them that non-skid goodness we expect from coasters. Ta da, beautiful handmade coasters that didn't break the bank!

Monogram coasters with the letter 'L'

 

Kitty and puppy coasters

If you're Photoshop-savvy, here's how you make the custom artwork: open a new file and size it to 4"x4". Let your creative self go crazy! You can fit four printouts on a standard letter-size sheet for printing ease. I used a lightweight cardstock and I would not recommend going heavier.

Where did I get the idea for making coasters? Pinterest, of course! I am truly loving that site...all crafters should hang out on there. Feel free to follow my boards on there for inspiration of your own! If you do make coasters, please let me know so I can see how they came out.

Happy Crafting!

Happy 2012

Another New Year is here! I generally do not make resolutions (you won't find me buying gym memberships or exercise equipment) but I did promise myself to make time for blogging this year. Hopefully I can get a good pile of posts going to help me keep that promise!

Today I'm sharing with you one of the Christmas cards I sent out this year. (Note to self: this year, start making Christmas cards in July!)  I really wound up in a time crunch with my personal cards this year, so I was looking for elegant but quick & easy!

I had found a card idea I really liked over on Pinterest (which if you're not a member of, join! It's a great place for ideas.) so I looked through my board and found it again. 

I really liked the snowflake, the layers, the stitching, and the simplicity of the card. Beautiful but rustic, natural but with a 'wow' factor.

Sadly when I first think about a card design based on a sample card, I try to recreate as much of the original as possible. Some day I'll learn! I just wind up driving myself crazy when I do that and then the card isn't me. So after some storming around the craft room, I came up with my own design that is me and that I was proud to send out to our friends and family.

The layered effect I liked is still there with the black cardstock, ivory parchment, and the green plaid all placed on top of a deep red base card. The snowflake is there (my favorite part) and the stamped sentiment of Merry Christmas. Perfect!

So, what did I use?

• brick red paper from my stash, cut to 11"x4.25" and folded in half to 5.5"x4.25"
• black Bazzill cardstock from my stash, cut to 5"x4"
• ivory parchment paper from my stash, cut to 4.75"x3.75"
• green plaid paper from my stash (seeing a trend?), cut to 2"x2"
• EK Success Large Snowflake paper punch
• StazOn ink in Timber Brown
• sentiment stamp
• We R Memory Keepers Sweetheart Inkers in green & white
• adhesive

Yup, this card was made entirely of things I already owned! How cool is that? The Sweetheart Inkers are brand new and are AWESOME. I actually won them over on the Captured Moments blog (they're my local scrapbooking store and I adore them). This was the first project I used them on and they were so easy to use.

Back to the card - start by cutting all of your paper to size. I wound up making 16 of these (I ran out of the plaid paper!) and doing them assembly-line style was the way to go. After cutting, fold up your base cards (if you're using pre-made ones you can obviously skip this step, but I like making my own). Punch out all of your snowflakes from the ivory parchment paper. (I kept the punches for some future project, of course!) Ink all of your edges to allow them time to dry before assembly! I used the white Sweetheart Inker on the black paper and the green on the parchment paper.

Now for assembly! The green plaid paper was attached to the back of the ivory parchment. Ivory parchment goes on the black cardstock, then the whole stack onto the brick red base card. Stamp the sentiment of 'Merry Christmas' and it's done!

This design can easily be used for any punch, any holiday. If you use it as an idea card, be sure to come back and tell me what you made!

Happy Crafting!

Party Hat Invitations

As I wave goodbye to over 100 cards heading out to a craft show in Vermont, I finally have time to start crafting for myself again (and blogging about it!). Hard to believe that a year ago this time I was very pregnant and now I'm planning my son's first birthday party! Where has the time gone?!?

Naturally I'm taking on the task of making the invitations myself (the joys & trials of being a paper crafter) and inspiration struck when I saw the latest email from Scrapbooks Etc. featuring this card which shall now be referred to as the inspiration card. I loved the playfulness of it and headed off to the craft store to recreate it.

My original plan was to stay very close to the inspiration card - polka dot paper, bumbles on the bottom, button top. Hah! Not only could I not find polka dot paper but the cost of the bumbles was obscene. I'm only doing 20 invitations, but when one spool of bumbles costs $3.50 and only gets you 4 cards...um, NO. As I stood there fretting over what to do now, my husband looks at me and says "how about plain paper and fun ribbon?" Well heck, why didn't I think of that?!? Creative burnout, that must be it...did I mention the 109 cards?

So off my genius husband and I went to the ribbon aisle (I showed him where it was, regaining some crafty points) and he found a cute spool of polka dot ribbon. We took it back to the scrapbook paper aisle where he picked out some dark teal paper to complement the ribbon, handed it all to me and said "here, do your thing!" Ok, he also created a template out of scrap paper I had printed coupons on so we could figure out how many cards we could get from each 12"x12" sheet and what was a good size base card. It's nice to have a husband who can think creatively, too.

The rest, however, was now up to me. Raiding my mother's button collection (this is a perfect craft for all those buttons you have laying around!) I now had the last ingredient I needed for some adorable party invitations.

What I used:

• dark teal 12"x12" card stock
• yellow 12"x12" card stock
• green 12"x12" card stock
• spool of polka dot ribbon
• spare buttons no more than 3/8"
• 1-1/2" circle punch
• Cricut to make the number 1's (from George & Basic Shapes, 2" tall)
• chalk to ink the edges 
• adhesive
• paper cutter and/or scissors
• word processing software to create the wording

My first step was to create the actual invitation wording for the party. For this I used Publisher, created a new page size, and added a triangle shape to stay inside of. I didn't want the wording to fill the entire inside of the card, so I made it about 1/2" smaller than the card. After setting up my shape it was a simple matter of staying inside the lines, choosing colors that complemented the card design, and printing them out on white card stock. I was able to get four invitations to a page which was great. Using as little paper as possible always makes me happy.

Those swirlies are me preventing party crashers...;) I printed this one on scrap paper which is why it looks, well, blah.

Now it was time to start making the party hat. Taking the teal card stock I cut the sheets into four 6"x6" squares. The square was then folded on the diagonal making a triangle, but not the type of triangle I wanted.

Using the point on the unfolded side I drew a line across the bottom and cut off the extra. Now it looks like a party hat!

Next I inked all the edges and the crease on the hat. You don't have to do this, but I'm an edge-inking addict and couldn't help myself.

While the edges dried I set up my Cricut to start cutting number 1's out of the yellow card stock. With the machine cutting away I set to work punching out circles. Amazingly enough they were done pretty fast and I inked all those edges before setting them aside. What, I told you I'm addicted...

Next was cutting the ribbon into lengths. I made each strip just a little larger than the bottom of the card to leave room for trimming it down to the angle of the card. My buttons didn't need anything (I decided not to make that huge, crazy bow) so now I was ready to start assembling!

Taking my card I attached the invitation wording to the inside with my adhesive.

Back on the front of the card I added the ribbon along the bottom and trimmed the ends to the shape of the card.

The circle went in the middle with the number on top. Adding the button on the top point I was done!

Hmm, now where did that number 1 go...?

Just 19 more to go...best part is that now the card fits nicely in a standard envelope, so no added postage!

Had I stuck with the bumbles on the bottom as in the inspiration card, something tells me they wouldn't have survived the post office.

Let me know if you try this yourself - I'd love to see pictures! Happy Crafting!